Double hung built and glazed in Monroe, Georgia.
Tucker builds the 3300 Series Double Hung Vinyl Window line and our wood windows in Monroe, Georgia, and glazes them in house on a Cardinal Glass line. The person you call about a size, a shape, or a date can walk out to the line and look at your order.
A few high volume units are built to our specification by partners and sold under our name. Everything else on this page comes off our own floor. Units are quoted to the rough opening, in white and black, across seven operating styles, for new construction and replacement work. When only the sash has failed, we build a kit to fit the frame that is already in the wall.
Five double hung series.
Double hung is the base unit on all five, and every one also runs as a stationary or fixed window, a transom, and the twenty one architectural shapes further down. Material is the first thing your builder picks, and we build all of it.
- Natural exterior and interior, ready for stain
- Treated with Wood Life 111 preservative
- 2 in. wood brick mould and tan jamb liners
- Bronze sash locks standard, white or tan optional
- Primed exterior, natural interior
- Treated with Wood Life 111, boot glaze sashes
- SDL in 7/8, 1‑1/8, and 7/8 putty
- PVC brick mould and composite sill
- 6/4 PVC sash, white standard
- Integrated interlocking rails
- Continuous finger lift and weep system
- GBG in white or tan, SDL in 7/8
- 6/4 vinyl sash in white, beige, or black
- Four welded corners
- Integrated finger lift and weep system
- GBG in white, beige, black, or two tone
Three single hung series, all vinyl.
One sash operates instead of two, and each series runs a matching picture window on the same profile. Same 3‑1/4 in. vinyl frame across all three, stepping up from residential to light commercial to impact rated.
- Cardinal LoE³‑366 glass, Duralite warm edge spacers
- Sloped pocket sill, two lift rails per sash
- Block and tackle balance system
- 17‑1/2 to 42‑1/2 wide, 35‑1/2 to 83‑1/2 tall
- Cardinal LoE³‑366 double strength glass
- Wet glazed for a stronger, weather tight bond
- Additional aluminum reinforcement
- Same frame sizes as the 1400
- Laminated impact glass, ASTM E1886 and E1996
- STC 36, OITC 30
- Integral nail fin, two all metal locks and keepers
- 17‑1/2 to 35‑1/2 wide, 35‑1/2 to 71‑1/2 tall
All three: 2850 units meet first floor egress and 3050 units meet second floor. Capped colors in bronze on white, black on white, and black on black. Warranty coverage varies by window series and component. See the current Tucker Limited Window Warranty for complete terms. Florida Product Approval FL46607 single hung and FL46606 picture, with FL46574 mulling on the 1600.
Standard on every double hung series
- 6/4 wide stile sash
- Cardinal Low‑E 270 11/16 in. insulated glass
- Continuous finger lift for one hand operation
- Adjustable foam filled weather stripping
- Dual action sash locks with adjustable keeper
- Tilt in sashes, cleaned from inside
- Full 4‑9/16 in. jambs
- PVC brick mould, or 2 in. wood on the Classic
- Composite sill and sill nosing on the 2100, 2200, and 2300
- Heavy duty bridge back compression jamb liners
Options on every double hung series
- Cardinal Low‑E 366 glass
- Argon fill
- GBG bars and simulated divided lite
- Extension jambs
- Full length screens
- AAMA DP50 performance upgrade
- Fixed windows on the 1100, 2200, and 2300
- Custom sizes on the 1100, 2200, and 2300
- Factory applied exterior trim: 5/4 x 4, 5/4 x 6, 1 x 4 BB
Eight configurations, across every series.
The series is the material. The unit is what goes in the opening. Every series runs the same unit types, as singles, twins, triples, and combinations.
Standard sizing
Sizes shown are the 3300 Series. Singles range from 1‑8 to 3‑4 wide; twins are sized by overall width, 3‑4 to 6‑0. Heights run 3‑0 to 6‑0 on both, and the taller sizes meet egress. The wood and PVC series run their own chart: widths 1‑8 to 3‑8 and heights 3‑2 to 6‑2 on double hung singles, with egress marked separately for wood, PVC, and vinyl. Outside of jamb and rough opening dimensions for every size are on the sizing sheets, and anything off the chart is a phone call.
Open the sizing sheetsTwenty one shapes off the standard sheet.
Architectural options for fixed windows, all of them a catalog order. Trim profiles and the full simulated divided lite patterns are on the same sheet. Anything not on it goes to the shop and gets built to the drawing.
Exterior trim profiles
Williamsburg casing is available out of Richmond only. Everything else runs from any plant.
See all shape, trim, and SDL optionsPrice every window on the job in the Design Portal.
Three kinds of job.
Three different windows.
Every series comes all three ways. What is already in the opening decides which one goes on the purchase order.
Not sure which one the job takes? Send a photo of the opening to your customer service rep and they will tell you what to order.
What dealers ask us.
Catalogs and spec sheets.
Performance numbers, sizing tables, trim profiles, and installation detail. Every link opens the current PDF, and the catalog links land on the page you asked for.
Price every window on the job in the Design Portal.
Enter the rough openings and every unit on the order prices as you go. Or call and talk it through with a customer service team that knows the product. Dealers, lumberyards, and one‑step distributors only.
Get Design Portal access